A natural wood veneer offcut set for exploring different colors, grains, and textures.
This set contains natural wood veneer offcuts generated during the production of furniture, interiors, and other products at MORI KOUGEI.
Centered around oak, each set includes a mix of different wood species with a variety of colors, grain patterns, and textures.
They can be used for marquetry, crafts, models, accessories, collage, prototyping, and many other creative projects.
Even within the same material category of “wood,” each species has its own distinctive color, grain, texture, and character.
This set is also a good way to explore and experiment with a variety of natural woods in small quantities.
What is wood veneer?
Wood veneer is a thin layer of natural wood, sliced to approximately 0.2–0.5 mm in thickness.
Although extremely thin, it retains the natural grain, color, and texture of real wood.
Since 1953, MORI KOUGEI has specialized in applying natural wood veneer for furniture, interiors, architecture, and other products.
The pieces in this set are offcuts from the same veneers we use in our daily production.
The sizes and shapes are irregular, but they allow you to experience and compare the distinctive colors and grain patterns of a variety of wood species.
Please read before purchasing
This product is raw wood veneer.
The veneers in this set are not backed with paper.
Because they are thin slices of natural wood, they may crack or split depending on how they are bent, handled, or cut in relation to the grain direction.
If you intend to bond the veneer to another surface, some familiarity with veneer work is recommended, including the selection of adhesive, the amount applied, and the method of pressing.
If you are using wood veneer for the first time, or if you are looking for a material that is easier to handle, we recommend our paper-backed Natural Wood Veneer Sheets.
The paper backing helps reinforce the veneer, making it less prone to cracking and easier to cut, handle, and apply.
If you are unsure which material is best for your project, please consider our
Natural Wood Veneer Sheets
.
Set contents
- 20 pieces or more
- A mix of at least 3 wood species
- Main species: Oak
- Approx. length: 300 mm
- Approx. width: 60–210 mm
- Approx. thickness: 0.2–0.5 mm
- No paper backing
- Unfinished
Please note that wood species, sizes, and shapes cannot be specified.
As this product is made from offcuts generated during production, the contents will vary from set to set.
Suggested uses
- Marquetry and decorative woodwork
- Models and product prototypes
- Accessories and small craft objects
- Collage and artwork
- Comparing wood species and grain patterns
- Finishing and processing tests
About natural materials and offcuts
Because this product is made from natural wood, each piece varies in color, grain, and texture.
The pieces are production offcuts, so their sizes and shapes are irregular.
Some pieces may include cracks, chips, warping, color variation, small knots, or other natural characteristics.
We hope you will enjoy these variations as part of the character of natural wood.
Store away from direct sunlight, high temperatures, and high humidity.
Frequently Asked Questions
Q. Can beginners use this product?
Yes, but some care and familiarity with veneer handling is recommended.
Because this product is raw veneer without paper backing, the thin wood can crack or split depending on the grain direction and how it is handled.
If you are using veneer for the first time, or if you would prefer a material that is easier to cut and apply, we recommend our
Natural Wood Veneer Sheets
.
Q. What is the difference between this product and your Natural Wood Veneer Sheets?
The main difference is whether or not the veneer has a paper backing.
This product is raw natural wood veneer, sliced thinly without any backing.
Our Natural Wood Veneer Sheets have paper applied to the back, which reinforces the veneer and makes it less likely to crack.
They are also easier to cut, handle, and apply.
If ease of use is important, we recommend our
Natural Wood Veneer Sheets
.
Q. How should the veneer be applied?
The most suitable bonding method depends on the substrate and the intended use.
Woodworking adhesive can be used in some cases, but because veneer is extremely thin, excessive moisture, too much adhesive, or uneven pressure may cause warping, cracking, or other issues.
This product is not designed for one specific bonding method.
Please check the properties of your substrate and adhesive, and test the process on a small piece before proceeding with your final project.
Q. Can I cut it with scissors or a utility knife?
Thin wood veneer can be cut with a utility knife or similar cutting tool.
However, depending on the species and grain direction, it may crack or split.
We recommend using a sharp blade and making several light passes rather than trying to cut through the veneer in one stroke.
Q. Can I use it for marquetry?
Yes.
At MORI KOUGEI, we also use a wide range of wood species for marquetry.
By combining different natural colors and grain patterns, you can create expressions that are unique to real wood.
Q. Can I choose the wood species included?
No. The species cannot be specified.
Each set is centered around oak and includes a variety of other wood species depending on the offcuts generated during our production process.
The fact that every set is slightly different is part of the character of this product.
Q. Can I specify the size?
No. Because this product is made from production offcuts, the size and shape of the pieces cannot be specified.
If you require veneer in a more consistent size, please see our
Natural Wood Veneer Sheets
.
Q. Is the surface finished?
No. The veneer is supplied unfinished, in its natural state.
It can be finished with oil, wax, polyurethane, or other suitable finishes if required.
As the color and appearance may change depending on the wood species and finish used, we recommend testing on a small offcut first.
