900 × 1800 mm / 1 sheet / JPY 7,700 including tax / Made to order; usually dispatched within 5 business days
Washi-backed, approximately 0.25 mm thick. Not self-adhesive; a separate adhesive is required.
Pale maple with subtle curly figure
A natural wood veneer sheet made from flat-grain maple from Japan, backed with washi paper. The pale surface has faint curly figure: a restrained detail within the grain, rather than a strongly figured appearance.
The photograph shows a material sample from Lot 261031-1, not the complete 900 × 1800 mm sheet. Grain, colour and figure vary with the section selected and how the veneer is joined, even within the same lot.
Our suggestion: use the pale surface across a larger area on furniture or a speaker cabinet. Plan the grain direction before bonding to make the most of its flowing pattern.
Suggested uses
- Flat wooden surfaces on furniture and interior fittings: Decorative veneering or resurfacing of plywood, MDF and similar substrates.
- Speaker cabinets: Decorative covering for cabinets made from plywood or MDF.
- Edges and marquetry: Cut to the required widths or shapes for edge covering and inlay work.
Specifications
- Size: 900 × 1800 mm
- Wood and origin: Maple / Japan
- Grain: Flat grain with faint curly figure
- Construction: Natural wood veneer backed with industrial washi paper
- Sheet thickness: Approximately 0.25 mm
- Material lot: 261031-1
- JAN / GTIN: 4571581382459
Can be cut with scissors or a craft knife. This sheet is not self-adhesive: it has no peel-and-stick backing. A separate adhesive is required.
Production and dispatch
Made to order. Usually dispatched within 5 business days of ordering.
This sheet is made by joining multiple veneer pieces side by side, rather than cutting a single piece of wood measuring 900 × 1800 mm. This flat-grain product uses veneer pieces approximately 150–300 mm wide. Widths depend on the wood, and the sheet has joints. For comparison, straight-grain veneer pieces are generally about 60–200 mm wide; this product is flat-grain. To allow for natural wood movement, sheets are made approximately 10 mm larger than 900 × 1800 mm. Packed rolled along the 1800 mm length.
Application and adhesive
Prepare a level substrate, dry-fit the grain, then bond with an adhesive suitable for both materials. The sheet can be cut with scissors or a craft knife. Test an offcut first when using a new substrate or finish.
An adhesive suitable for iron-on veneering can also be used. See our shared preparation and application guide (opens in a new tab) and application video (opens in a new tab).
We sell CH7WN adhesive repacked in smaller quantities. The F☆☆☆☆ classification refers to CH7WN adhesive. Adhesive is sold separately. See the CH7WN product page for instructions and sales conditions.
Frequently asked questions
Can I apply it to curved surfaces?
A surface curved in one direction, such as the side of a cylinder, may be suitable depending on its shape and the bonding method. Test first for tight bends or small curves. Compound curves, such as a sphere, are more likely to cause wrinkles.
Can I order a custom size?
Custom sizes up to 900 × 1800 mm are available. The price is the same as the 900 × 1800 mm sheet in the same wood and specification. A smaller size does not cost less. For a custom-size order, contact us with the required dimensions and quantity. We will confirm availability based on the material dimensions and stock.
Before ordering and use
- The substrate's colour or pattern may show through this pale, thin wood. Test on the actual substrate first.
- Grain and colour vary from sheet to sheet. The photograph does not guarantee an identical pattern or the same appearance of curly figure.
- If applying a finish, test a small piece to check the colour and compatibility with the bonded sheet.
Please see our refund policy for return and exchange conditions.
Learn more about maple
Read about kaede, maple and figured grain. The article also shows an existing figured product. Lot 261031-1 offered here is flat-grain material with only faint curly figure.
Explore veneer sheet sizes and types
