A4 210 × 297 mm / 1 sheet / JPY 660 including tax / Ready-made stock
Washi-backed, approximately 0.25 mm thick. Not self-adhesive; a separate adhesive is required.
Pale maple with subtle curly figure
A natural wood veneer sheet made from flat-grain maple from Japan, backed with washi paper. The pale surface has faint curly figure: a restrained detail within the grain, rather than a strongly figured appearance.
The photograph shows a material sample from Lot 261031-1. Grain, colour and figure vary with the section selected and how the veneer is joined, even within the same lot.
Our suggestion: use the pale, quiet grain for decorating small objects or marquetry. Select the part of the grain you want to show, then cut it into smaller pieces.
Suggested uses
- Small repairs and resurfacing: Cut to size for flat wooden areas on furniture and small objects. Colour and grain will not necessarily match the existing wood.
- Furniture edges: Cover exposed edges of plywood or MDF.
- Marquetry and crafts: The paper backing makes the thin veneer easier to handle when cutting and combining small shapes.
Specifications
- Size: A4 210 × 297 mm
- Wood and origin: Maple / Japan
- Grain: Flat grain with faint curly figure
- Construction: Natural wood veneer backed with industrial washi paper
- Sheet thickness: Approximately 0.25 mm
- Material lot: 261031-1
- JAN / GTIN: 4571581382442
Can be cut with scissors or a craft knife. This sheet is not self-adhesive: it has no peel-and-stick backing. A separate adhesive is required.
Supply
These A4 sheets are already made and held in stock, so there is no production wait after ordering. We dispatch them as soon as shipping preparations are complete.
Application and adhesive
Prepare a level substrate, dry-fit the grain, then bond with an adhesive suitable for both materials. The sheet can be cut with scissors or a craft knife. Test an offcut first when using a new substrate or finish.
An adhesive suitable for iron-on veneering can also be used. See our shared preparation and application guide (opens in a new tab) and application video (opens in a new tab).
We sell CH7WN adhesive repacked in smaller quantities. The F☆☆☆☆ classification refers to CH7WN adhesive. Adhesive is sold separately. See the CH7WN product page for instructions and sales conditions.
Frequently asked questions
Can I apply it to curved surfaces?
A surface curved in one direction, such as the side of a cylinder, may be suitable depending on its shape and the bonding method. Test first for tight bends or small curves. Compound curves, such as a sphere, are more likely to cause wrinkles.
Can I order a custom size?
Custom sizes up to 900 × 1800 mm are available. The price is the same as the 900 × 1800 mm sheet in the same wood and specification. A smaller size does not cost less. For a custom-size order, contact us with the required dimensions and quantity. We will confirm availability based on the material dimensions and stock.
Before ordering and use
- The substrate's colour or pattern may show through this pale, thin wood. Test on the actual substrate first.
- Grain and colour vary from sheet to sheet. The photograph does not guarantee an identical pattern or the same appearance of curly figure.
- If applying a finish, test a small piece to check the colour and compatibility with the bonded sheet.
Please see our refund policy for return and exchange conditions.
Learn more about maple
Read about kaede, maple and figured grain. The article also shows an existing figured product. Lot 261031-1 offered here is flat-grain material with only faint curly figure.
Explore veneer sheet sizes and types
